metal removerDirections for use:

(Based on a 50 000l pool)

Use only as directed.


  1. Unplug the automatic pool cleaner
  2. With the filter on circulate position, pour 1 bottle of HTH® Metal remover around the sides of the pool.
  3. Allow to circulate for at least 8 hours to ensure thorough mixing.
  4. After 8 hours, check and correct the pH is necessary.
  5. Shock treat with 3xnormal dose of HTH® Granular + mineralsoft or 1 sachet of HTH® Shock It ®
  6. Allow the filter to run continuously for 24 hours.
  7. If there is a significant amount of brown sediment on the floor of the pool, this should be manually vacuumed up with the filter set on the waste position.
  8. In severe cases, an additional shock treatment may be required.
  9. Continue with normal chlorination and filtration routine.



here to help


Monday - Friday
Monday - Friday
08:00 - 16:30 (GMT +2)
08:00 - 16:30 (GMT +2)